Applications, appeals, permitted development, enforcement and planning strategy across England
Class G: Coal Authority mine safety
Part 17 Class G allows the Coal Authority or a licensed operator to carry out development required for mine or disused mine maintenance and safety, including protection of adjacent land surfaces.
It is the companion to Class C for these coal-sector bodies. Prior approval may be required even where the works have a safety purpose.
England only. For other jurisdictions, see the Welsh GPDO or local legislation.
Need help with permitted development?
Permitted development can avoid a full planning application, but only if the right applies and every relevant limit and condition is met. Planning Geek can check the planning history, Article 4 directions and other restrictions, and help with a lawful development certificate or prior approval where needed.
Prior approval test
Detailed siting, design and external appearance generally require prior approval from the mineral planning authority. G.1(2) contains a limited exception where external appearance is not materially affected, the 15 metre or applicable replacement height limit is met, and any extension, alteration or replacement of an existing building stays within a 25% cubic-content and 1,000 square metre floorspace increase. The clauses must be checked together.
The authority’s approval decision is constrained to effects on neighbourhood amenity that can reasonably be addressed, or whether the works should reasonably be sited elsewhere.
Relevant legislation
Read the current GPDO Schedule 2 Part 17 text together with the general limits in Article 3. The statutory extract below provides the detailed class wording; check the consolidated text for any later changes.
Class G: Coal Authority mine safety statutory wording
Class G – coal-mining development by the Coal Authority etc for maintenance or safety
Permitted development
G. The carrying out by the Coal Authority or a licensed operator of development required for the maintenance or safety of a mine or a disused mine or for the purposes of ensuring the safety of the surface of the land at or adjacent to a mine or a disused mine.
Conditions
G.1— (1) Subject to sub-paragraphs (2) and (3), development is permitted by Class G subject to the prior approval of the mineral planning authority of detailed proposals for the siting, design and external appearance of the building, plant or machinery proposed to be erected, installed, extended or altered.
(2) The prior approval referred to in sub-paragraph (1) is not required if—
(a) the external appearance of the mine or disused mine at or adjacent to which the development is to be carried out would not be materially affected;
(b) no building, plant or machinery, structure or erection—
(i) would exceed a height of 15 metres above ground level; or
(ii) where any building, plant, machinery, structure or erection is rearranged, replaced or repaired, would exceed a height of 15 metres above ground level or the height of what was rearranged, replaced or repaired, whichever is the greater, and
(c) the development consists of the extension, alteration or replacement of an existing building, within the limits set out in sub-paragraph (4).
(3) The prior approval referred to in sub-paragraph (1) may not be refused or granted subject to conditions unless the authority are satisfied that it is expedient to do so because—
(a) the proposed development would injure the amenity of the neighbourhood and modifications could reasonably be made or conditions reasonably imposed in order to avoid or reduce that injury; or
(b) the proposed development ought to be, and could reasonably be, sited elsewhere.
(4) The limits referred to in paragraph G.1(2)(c) are—
(a) that the cubic content of the building as extended, altered or replaced does not exceed that of the existing building by more than 25%; and
(b) that the floor space of the building as extended, altered or replaced does not exceed that of the existing building by more than 1,000 square metres.
Page created: 16th August 2023
Page updated: 24th September 2026





